USF-50 Ver3.0 series Technical Training презентация

Revision History

Table of Contents
01. Specification
03. Operation Key Description
04. Summary of Each Mode
05. User Setting
06. Installation Procedure
07. Machine Disassembly
11. Preventive Maintenance
09. Trouble Shooting
08. Ras Specification
12. Running Test
13. LOG
14. Download
15. Trouble Report
02. Reliability
10. Adjustment
16. Appendix

01. Specification
What is USF-50?
USF-50 is the Banknote Sorter
SORT
COUNT

01. Specification
USF-50 Model Line Up
USF-50
USF-51
USF-52

01.Specification
01. Specification
Location and Function of Each Part

01.Specification
01. Specification
Location and Function of Each Part (Continued)

01.Specification
01. Specification
Location and Function of Each Part (Continued)

01. Specification
Location and Function of Each Part (Continued)

01. Specification
Location and Function of Each Part (Continued)

01. Specification
Location and Function of Each Part (Continued)

01. Specification
Location and Function of Each Part (Continued)

01.Specification
01. Specification
General Specification
Capacity

01.Specification
01. Specification
Maximun Counting Speed
General Specification (Continued)

01.Specification
01. Specification
Size and Weight
18kg approx.
General Specification (Continued)

Power Supply
Rated Voltage : AC 100-240v
Frequency : 50 / 60 Hz
Power Consumption
Required Operating Environment
Humidity : 20%~90% RH
Temperature : 5 ~ 35 degree celcius
Altitude : Nor over 3000m
01.Specification
01. Specification
General Specification (Continued)

Countable Notes
Minimum (5 Euro Bill)
Maximum
Thickness
0.08~0.12mm
01.Specification
01. Specification
General Specification (Continued)
120mm
62mm
177mm
85mm

01.Specification
01. Specification
General Specification (Continued)
Identification Function

01.Specification
01. Specification
General Specification (Continued)
Interface

03. Reliability
Guarantee term : 12 months
The standard life time of the machine
Allowable use years : 5 years
Process number of banknotes : 7.5 million banknotes
The standard condition for use : 5000 banknotes 1/day
02. Reliability
Reliability

LED Display Description
03. Operation Key Description

03. Operation Key Description
Operation Key Description

03. Operation Key Description
Operation Key Description (Continued)

03. Operation Key Description
Operation Key Description (Continued)
IF ADD MODE ON
IF ADD MODE OFF
TOTAL
TOTAL
COUNT
COUNT
$10
$20
$20
$20
＋
$10

03. Operation Key Description
Operation Key Description (Continued)

03. Operation Key Description
Operation Key Description (Continued)

04. Summary of Each Mode
Daily Operation
Power ON
Select Mode

04. Summary of Each Mode
Daily Operation
Count / Sort Banknotes
1. Direction Setting
Select Direction setting from
[OFF] / [FACE] / [ORIENTATION]
COUNT
SORT

04. Summary of Each Mode
Daily Operation
Count / Sort Banknotes
1. Direction Setting (Continued)
Press F2 Key to select direction setting
REPRINT
TOTAL
DRCTN
MIX
MIX2
BATCH
---
€0
0pcs

04. Summary of Each Mode
Daily Operation
Count / Sort Banknotes
2. Display detailed Result

04. Summary of Each Mode
Daily Operation
Count / Sort Banknotes
3. Batch Number Setting

04. Summary of Each Mode
Daily Operation
Count / Sort Banknotes
4. Manual Input
MIX
BATCH
---
DENOMI
500
200
100
50
20
PCS
MAN
€10,000
GT.TOTAL
0
0
100
0
0
0
0
0
0
0

04. Summary of Each Mode
Daily Operation
Count / Sort Banknotes
5. GRAND TOTAL DISPLAY
Press F3 Key to display the total deposit amount
REPRINT
TOTAL
DRCTN
MIX
MIX2
BATCH
---
€0
0pcs
MIX
BATCH
---
DENOMI
500
200
100
50
20
PCS
MAN
€10,000
GT.TOTAL
0
0
100
0
0
0
0
0
0
BACK
GT.TTL
PRINT
0
GRAND
TOTAL

04. Summary of Each Mode
Daily Operation
Count / Sort Banknotes
5. GRAND TOTAL DISPLAY(Continued)
Grand Total and Grand Machine Count Total display
can be changed by F2 Key
MIX
BATCH
---
DENOMI
500
200
100
50
20
PCS
€10,000
GM.TOTAL
0
0
100
0
0
BACK
GT.TTL
PRINT
MIX
BATCH
---
DENOMI
500
200
100
50
20
PCS
MAN
€10,000
GT.TOTAL
0
0
100
0
0
0
0
0
0
BACK
GM.TTL
PRINT
0
=
=
+

04. Summary of Each Mode
Daily Operation
Count / Sort Banknotes
5. GRAND TOTAL DISPLAY(Continued)
Grand Total can be cleared by pressing “Clear” Key
MIX
BATCH
---
DENOMI
500
200
100
50
20
PCS
€10,000
GM.TOTAL
0
0
100
0
0
BACK
GT.TTL
PRINT
MIX
BATCH
---
NO
YES
CLEAR TOTAL?

04. Summary of Each Mode
Summary of Each Mode

04. Summary of Each Mode
MIX Mode
MIX MODE
COUNT MIXED NOTES

04. Summary of Each Mode
MIX Mode
MIX MODE
COUNT MIXED NOTES

04. Summary of Each Mode
MIX Mode
MIX MODE
1. How To Enter Mix Mode?
2. What is Mix Mode?
Count Mixed Notes
Mode Select Key
Mixed
Notes

04. Summary of Each Mode
MIX Mode
MIX2 MODE
1. How To Enter Mix2 Mode
2. What is Mix2 Mode?
Count mixed notes and stop at every different
denomination detection
Mode Select Key
STOP
STOP
STOP

04. Summary of Each Mode
D.D Mode
D.D MODE
COUNT 1ST DENOMINATION

04. Summary of Each Mode
D.D. Mode
How To Enter D.D Mode?
What is D.D. Mode?
Count Only First detected denomination
FIRST
COUNT
$10
COUNT
ONLY
$10
REJECT
$5
$20
$50
$100

04. Summary of Each Mode
FIT Mode
FIT MODE
FITNESS SORTING

04. Summary of Each Mode
FIT Mode
FIT MODE
FITNESS SORTING

04. Summary of Each Mode
FIT Mode
FIT MIX MODE
1. How To Enter FIT MIX Mode?
2. What is FIT MIX MODE?
Sort Mixed notes with FIT/UNFIT
Mixed
Notes

04. Summary of Each Mode
FIT Mode
FIT MIX MODE
3. How To Operate Fitness Sorting?
1. Count Mixed Banknotes
[Stacker : FIT] / [RJ Stacker: RJ & UNFIT]
1ST SORT

04. Summary of Each Mode
FIT Mode
FIT MIX MODE
3. How To Operate Fitness Sorting?
2. Remove notes in Stacker and RJ Stacker
3. Count notes in RJ Stacker
[Stacker : UNFIT] / [RJ Stacker: RJ]
2nd SORT

04. Summary of Each Mode
FIT Mode
FIT D.D. MODE
1. How To Enter FIT D.D. Mode?
2. What is FIT D.D. MODE?
Sort the first detected denomi with FIT / UNFIT
ONLY
FIRST
DENOMI

04. Summary of Each Mode
FIT Mode
ATM MIX MODE
1. How To Enter ATM MIX Mode?
2. What is ATM MIX MODE?
Sort Mixed notes with ATM / UNFIT
Mixed
Notes

04. Summary of Each Mode
FIT Mode
FIT MIX MODE
3. How To Operate Fitness Sorting?
1. Count Mixed Banknotes
[Stacker : ATM] / [RJ Stacker: RJ & UNFIT & TLR]
1ST SORT
ATM
UNFIT
TELLER

04. Summary of Each Mode
FIT Mode
FIT MIX MODE
3. How To Operate Fitness Sorting?
2. Remove notes in Stacker and RJ Stacker
3. Count notes in RJ Stacker
[Stacker : UNFIT] / [RJ Stacker: RJ]
2nd SORT
ATM
UNFIT
TELLER

04. Summary of Each Mode
FIT Mode
ATM D.D. MODE
1. How To Enter ATM D.D. Mode?
2. What is ATM D.D. MODE?
ONLY
FIRST
DENOMI

04. Summary of Each Mode
COUNT Mode
COUNT MODE
COUNT ONLY PIECES

04. Summary of Each Mode
COUNT Mode
How To Enter COUNT Mode?
What is COUNT Mode?
-Count only the number of the notes
-Count only registered size in first note
-Counterfeit detection is not effective (Only double notes are rejected)

05. User Setting
How to Enter User Setting
Press Menu Key
Press F1 Key

ATM FIT MODE [OFF]
Select the level of Fitness detection level (ON / OFF).
05. User Setting
Description of USER SETTING ( [ ] is Default Value)
IF SETTING IS ON
IF SETTING IS OFF
ATM MODE
FIT MODE
1ST SORT
2ND SORT
ON
OFF
or

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
LCD CONTRAST [ L - - M - - H ]
Select LCD contrast
Setting Value : L--M--8
INTERFACE [ A:OFF / B:OFF ]
Select Interface for each RS-232C connector
A : [OFF / TERMINAL / PRINTER]
B : [OFF / TERMINAL / PRINTER]

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
AUTO START [ ON ]
Select Auto Start function ON / OFF
REPEAT START [ ON ]
Select Repeat Start function ON / OFF
SETTING
ON
SETTING
OFF
FULL
REMOVE
AUTOMATICALLY
REPEAT START
NEED TO PUSH
“START/STOP”
TO RESTART

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
DOUBLE NOTES [ L - - M - - H ]
THIS SETTING IS EFFECTIVE ONLY IN COUNT MODE
Select Double Note Detection Level
L : LOOSE / H : TIGHT

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
BATCH ACC(D.D) [ OFF ]
THIS SETTING IS EFFECTIVE ONLY IN D.D. MODE
A
C
C
E
P
T
IF SETTING IS ON
[Example]
Batch Number : 100pcs
COUNTING…
A
C
C
E
P
T
BATCH
MEMORY
0
BATCH
MEMORY
60
A
C
C
E
P
T
BATCH
MEMORY
100
COUNT
STOP

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
BATCH ACC(D.D) [ OFF ] (Continued)
THIS SETTING IS EFFECTIVE ONLY IN D.D. MODE
A
C
C
E
P
T
IF SETTING IS OFF
[Example]
Batch Number : 100pcs
COUNTING…
A
C
C
E
P
T
BATCH
MEMORY
0
BATCH
MEMORY
0
COUNTING…
A
C
C
E
P
T
BATCH
MEMORY
0
COUNTING…

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
BACK LIGHT BRIGHTNESS [ L - - M - - H ]
Select Backlight Brightness
MODE KEY LOCK [ OFF ]
Select ModeKey Lock ON or OFF
LOCK

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
BUZZER [ ON ]
Select ERROR buzzer ON or OFF
DUAL USAGE [ OFF / OFF ]
Select Dual Usage function ON or OFF
Select Printer Common Use ON or OFF
SHARE

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
DUAL USAGE [ OFF / OFF ] (Continued)
Select Dual Usage function ON or OFF
IF SETTING IS ON
IF SETTING IS OFF
ON
OFF
or
SHARE

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
DUAL USAGE [ OFF / OFF ] (Continued)
Select Dual Usage function ON or OFF
IF SETTING IS ON
IF SETTING IS OFF
ON
OFF
or
PRINTER
(PORT A)
SHARE
PRINTER
(PORT A)
PRINTER
(PORT B)

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SHUTTER [ OFF / NORMAL / BATCH ]
Select the behavior of the stacker shutter
1 : OFF
2 : NORMAL
3 : BATCH

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SHUTTER [ OFF / NORMAL / BATCH ]
Select the behavior of the stacker shutter
NORMAL
OFF
BATCH
ALWAYS OPEN

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SHUTTER [ OFF / NORMAL / BATCH ]
Select the behavior of the stacker shutter
NORMAL
OFF
BATCH
CLOSE

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SHUTTER [ OFF / NORMAL / BATCH ]
Select the behavior of the stacker shutter
NORMAL
OFF
BATCH
CLOSE
CLOSE

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
ASSIGN OPERATOR [ A:OP1 / B: OP2 ]
Select the behavior of the stacker shutter
OPERATOR : A
OPERATOR : B

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
OPERATOR REGISTORY [ - ]
Register the operator name

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SELECT LANGUAGE [ OFF ]
Select Language
IF SETTING IS ON
IF SETTING IS OFF
ON
OFF
or

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
RJ REMINDER [ OFF ]
Select RJ Reminder function ON / OFF
SETTING
ON
SETTING
OFF
BILLS
IN
RJ
STACKER
NOT
EFFECTIVE
EFFECTIVE

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
RJ CAUSE PRINT [ OFF ]
Select printing RJ Reason ON / OFF
RJ DENOMI MODE [ OFF ]
Select RJ Denomi Mode ON / OFF
$ 10
$20
$ 50
REJECT
$ 1
$ 2
$ 5
DENOMINATION : RAS 4001
ON
OFF
or
$ 100

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
MIX BATCH [ OFF / PCS / MIX ]
THIS SETING IS EFFECTIVE ONLY IN MIX MODE
Select BATCH Pattern
OFF
PCS
OFF
MIX

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
MIX BATCH [ OFF / PCS / MIX ]
THIS SETING IS EFFECTIVE ONLY IN MIX MODE
Select BATCH Pattern
PCS
BATCH SETTING
$1 100PCS
$2 100PCS
$5 50PCS
$10 10PCS
$20 100PCS
$50 10PCS
$100 100PCS
MACHINE STOPS COUNTING WHEN $2 IS COUNTED 100 PCS.
PCS
OFF
MIX

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
MIX BATCH [ OFF / PCS / MIX ]
THIS SETING IS EFFECTIVE ONLY IN MIX MODE
Select BATCH Pattern
BATCH SETTING
9 PCS
MIX
PCS
OFF
MIX
STOPS at 9PCS

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
DIGIT MARK [ , ]
Select digit mark
[example]
123,456 / 123.456 / 123’456 / 123456
SLEEP MODE [ OFF / 3M / 5M / 10M ]
Select the minutes to start Sleep Mode.
EXTERNAL DISPLAY [OFF]
Select External Display Interface ON or OFF
ZZZ…

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
EXTERNAL KEYBOARD [OFF]
Select Key Board Interface ON or OFF.
PRINTER AUTO CUT [ OFF ]
Select Printer Auto Cut function ON or OFF.
This setting is effective ONLY FOR STAR printer
TIME SETTING [ - ]
Set the time.

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
CURRENCY INITIALIZE [ OFF ]
Set the Currency Initialize when “power on” ON or OFF.
SETTING
ON
SETTING
OFF
INITIALIZE
€
DEFAULT:
$
POWER
OFF / ON
$
€

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
PRINTER BAUD RATE [ 9600 ]
Select printer baud rate (9600 / 19200 / 38400).
SERIAL PRINT SET [ OFF ]
Select Printer Auto Cut function ON or OFF.
This setting is effective ONLY FOR STAR printer

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SERIAL PRINT SET [ OFF ]
Select Serial Print Function ON or OFF.
SERIAL NUMBER
DATE 22.04.2010 14:22:09
USD OP1
DENOMI. PCS. AMOUNT
100 3 300
TOTAL 3 300
---------------------------------------------
DENO. VER. SERI NUMBER
--------------------------------------------- 100 N FK49923334A
100 N FK49963633B
100 N FK49944653C
SIGNATURE
___________________

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SERIAL PRINT SET - ERROR DIGIT [ OFF / 1 / 2 / 3 / 4 / 5 ]
Select Error Digit .
If the error character is more than this number,
The banknotes go to the RJ stacker
SERIAL NUMBER
FK49???4??A
FK49??36??B
FK49944???C
FK49944??3C
FK499?4653C
RJ
RJ
RJ
ST
ST
EXAMPLE

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SERIAL PRINT SET - PRINT SIGNATURE[ ON / OFF ]
Select Signature Space ON or OFF.
SERIAL NUMBER
DATE 22.04.2010 14:22:09
USD OP1
DENOMI. PCS. AMOUNT
100 3 300
TOTAL 3 300
---------------------------------------------
DENO. VER. SERI NUMBER
--------------------------------------------- 100 N FK49923334A
100 N FK49963633B
100 N FK49944653C
SIGNATURE
___________________

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SERIAL PRINT SET - PRINT TIMES[ 1 / 2 / 3 ]
Select Print times.
SERIAL NUMBER
DATE 22.04.2010 14:22:09
USD OP1
DENOMI. PCS. AMOUNT
100 3 300
TOTAL 3 300
---------------------------------------------
DENO. VER. SERI NUMBER
--------------------------------------------- 100 N FK49923334A
100 N FK49963633B
100 N FK49944653C
SIGNATURE
___________________
SERIAL NUMBER
DATE 22.04.2010 14:22:09
USD OP1
DENOMI. PCS. AMOUNT
100 3 300
TOTAL 3 300
---------------------------------------------
DENO. VER. SERI NUMBER
--------------------------------------------- 100 N FK49923334A
100 N FK49963633B
100 N FK49944653C
SIGNATURE
___________________
SERIAL NUMBER
DATE 22.04.2010 14:22:09
USD OP1
DENOMI. PCS. AMOUNT
100 3 300
TOTAL 3 300
---------------------------------------------
DENO. VER. SERI NUMBER
--------------------------------------------- 100 N FK49923334A
100 N FK49963633B
100 N FK49944653C
SIGNATURE
___________________

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SERIAL PRINT SET - UNFIT PRINT [ ON / OFF ]
Select UNFIT CONTENT PRINTING ON or OFF.
SERIAL NUMBER
DATE 22.04.2010 14:22:09
USD OP1
DENOMI. PCS. AMOUNT
100 3 300
TOTAL 3 300
---------------------------------------------
FIT
100 AF86861683H
100 CB05119862A
UNFIT
100 B18378576A

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SELECT PRINTER [ 1.SITIZEN]
Select Printer type.

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
AUTO SECOND SORT [ OFF / MANUAL / AUTO ]
Select the behavior for the 2ND Sort function
OFF
MAN
OFF
AT
1ST SORT
2ND SORT
OFF
This example is under the setting of “ATM mode : ON”

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
AUTO SECOND SORT [ OFF / MANUAL / AUTO ]
Select the behavior for the 2ND Sort function
MAN
MAN
OFF
AT
1ST SORT
2ND SORT
M
A
N
U
A
L
This example is under the setting of “ATM mode : ON”

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
AT
MAN
OFF
AT
1ST SORT
2ND SORT
A
U
T
O
This example is under the setting of “ATM mode : ON”
AUTO SECOND SORT [ OFF / MANUAL / AUTO ]
Select the behavior for the 2ND Sort function

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
ST FULL CHECK [ ON / OFF ]
USER SETTING 12. SHUTTER
SHOULD BE “OFF”
SETTING
ON
SETTING
OFF
COUNTING
STOP
COUNTING
NO STOP
COUNTING
SOFTWAREFULL
DETECTION

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
FIT THRESHOLD SETTING
Set the fitness value.

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
1. HOW TO SET THE FIT VALUE (Continued)
1. Select Parameter.
DENOMI
500
200
100
50
20
A
160
32. FIT THRESHOLD
ITEM
DEFECT
ITEM DETAIL
1. FORMAT
B
160
160
160
160
160
160
160
160
160
DENOMI
10
5
A
160
B
160
160
160

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
1. HOW TO SET THE FIT VALUE (Continued)
2. Select Denomi.
DENOMI
500
200
100
50
20
A
160
32. FIT THRESHOLD
ITEM
DEFECT
ITEM DETAIL
1. FORMAT
B
160
160
160
160
160
160
160
160
160
DENOMI
10
5
A
160
B
160
160
160

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
1. HOW TO SET THE FIT VALUE (Continued)
3. Set Value.
DENOMI
500
200
100
50
20
A
160
32. FIT THRESHOLD
ITEM
DEFECT
ITEM DETAIL
1. FORMAT
B
160
160
160
160
160
160
160
160
160
DENOMI
10
5
A
160
B
160
160
160

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
2. MAIN CONCEPT
There are 3 Big Factors of UNFIT

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
2. MAIN CONCEPT
There are detailed parameters in 3 Big Factors.

3. THICKNESS
1. CORNER FOLD
2. PARTIAL TAPE
2. STAIN
1. PARTIAL STAIN
2. INK STAIN
3. WATERMARK
4. BLEACH
5. EDGE STAIN
6. CRUMPLE STAIN
7. GRAFFITI 1
8. GRAFFITI 2
DEFECT
1. SHAPE
2. MISSING SIDE
3. MISSING CORNER
4. HOLE
Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
2. MAIN CONCEPT
There are detailed parameters in 3 Big Factors.

DEFECT
STAIN
THICKNESS
Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
2. MAIN CONCEPT
There are detailed parameters in 3 Big Factors.

DEFECT
STAIN
THICKNESS
Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
2. MAIN CONCEPT
There are detailed parameters in 3 Big Factors.

DEFECT
THICKNESS
Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
2. MAIN CONCEPT
There are detailed parameters in 3 Big Factors.

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
2. MAIN CONCEPT
There are detailed parameters in 3 Big Factors.

DEFECT
THICKNESS
Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
2. MAIN CONCEPT
There are detailed parameters in 3 Big Factors.

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
2. MAIN CONCEPT
There are detailed parameters in 3 Big Factors.

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (Continued)
2. MAIN CONCEPT
There are detailed parameters in 3 Big Factors.

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (ONLY FOR USF-52) (Continued)
2. MAIN CONCEPT
Set the value of fitness sorting from 0-255.
Value must be the multiple number of
32(0/32/64/96/128/160/192/224/255)

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (ONLY FOR USF-52) (Continued)
2. MAIN CONCEPT

Description of USER SETTING ( [ ] is Default Value)
05. User Setting
FIT THRESHOLD SETTING (ONLY FOR USF-52) (Continued)
2. MAIN CONCEPT

THERE ARE 14 PARAMETERS FOR ALL DENOMINATION
Description of USER SETTING ( [ ] is Default Value)
05. User Setting

THERE ARE 14 PARAMETERS FOR ALL DENOMINATION
Description of USER SETTING ( [ ] is Default Value)
05. User Setting

THERE ARE 14 PARAMETERS FOR ALL DENOMINATION
Description of USER SETTING ( [ ] is Default Value)
05. User Setting

THERE ARE 14 PARAMETERS FOR ALL DENOMINATION
Description of USER SETTING ( [ ] is Default Value)
05. User Setting

THERE ARE 14 PARAMETERS FOR ALL DENOMINATION
Description of USER SETTING ( [ ] is Default Value)
05. User Setting

THERE ARE 14 PARAMETERS FOR ALL DENOMINATION
Description of USER SETTING ( [ ] is Default Value)
05. User Setting

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
SERIAL DATA SAVE [ OFF ]
Select Serial Data Save function ON or OFF.
---------------------------------------------
DENO. VER. SERI NUMBER
--------------------------------------------- 100 N FK49923334A
100 N FK49963633B
100 N FK49944653C
100 N FK49942653C
100 N FK49944651C 100 N FK499446

05. User Setting
Description of USER SETTING ( [ ] is Default Value)
POPUP AUTO CHANGE [ 3S ]
Select the time to display the popup message [ 3S / 5S / OFF ]

06. Installation Procedure
Over View

06. Installation Procedure
Installation Procedure
In detail, refer to the
technical document
“Installation Manual”

07. Machine Disassembly
1.Unit Structure
OVER VIEW

2. Sensor Layout
07. Machine Disassembly

2. Sensor Layout
07. Machine Disassembly
BV

2. Sensor Layout
07. Machine Disassembly

07. Machine Disassembly
3. Board Layout and How it Works

07. Machine Disassembly
4. Board Layout and How it Works

How to Enter RAS Mode
08. RAS Specification

Description RAS Mode (Pick Up)
08. RAS Specification
00. SENSOR ADJUST(MAIN)
Adjust All Photo Sensor.
(VP Sensors are not included)

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
Adjust Sensors in BV Unit

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
01. LINE SENSOR
Adjust Line Sensor.
1. Press [START] key (DO NOT SET THE GAUGE YET).
2. Set the Adjustment Gauge and close unit.
SENSOR ADJUST BV
PLACE A REFFERENCE
DUMMY
LTB0H1030Z0
ADJUSTMENT GAUGE SET

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
01. LINE SENSOR
Adjust Line Sensor.
3. Press [START] key.
4. Finish.
SENSOR ADJUST BV
LINE SENSOR
OK
REMOVE DUMMY
PRESS START KEY

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
02. THIN SENSOR
Adjust Thickness Sensor.
1. Press [START] key (DO NOT SET THE GAUGE YET).
2. Set the Adjustment Gauge and close unit.
SENSOR ADJUST BV
SET DUMMY SHEET &
PRESS START KEY
LTB0H5081Z0
FILM SHEET

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
02. THIN SENSOR
Adjust Thickness Sensor.
3. Press [START] key.
4. Finish.
SENSOR ADJUST BV
THIN SENSOR
COMPLETE

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
03. UV SENSOR
Adjust UV Sensor.
1. Press [START] key (DO NOT SET THE GAUGE YET).
2. Set the Adjustment Gauge and close unit.
SENSOR ADJUST BV
PLACE A REFFERENCE
DUMMY
LTB0H1030Z0
ADJUSTMENT GAUGE SET

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
03. UV SENSOR
Adjust UV Sensor.
3. Press [START] key.
4. Finish.
SENSOR ADJUST BV
LINE SENSOR
OK
REMOVE DUMMY
PRESS START KEY

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
04. VP SENSOR
Adjust VP Sensor.
1. Press [START] key.
2. Finish.
SENSOR ADJUST BV
VP SENSOR
OK

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
05. MG SENSOR
Adjust MG Sensor.
1. Press [START] key.
2. Finish.
SENSOR ADJUST BV
MG SENSOR
OK

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
06. STAIN SENSOR
Adjust the Fitness Correction data
1. Press [START] key
2. Prepare 8 pieces of the adjustment dummy
SENSOR ADJUST BV
PUSH START KEY &
COUNT START
(STEP1/5)
LTB0H5011Z0
FITNESS CORRECTION DUMMY

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
06. STAIN SENSOR
Adjust the Fitness Correction data
3. Count 8 pieces of the adjustment dummy in
3 Positions
3 POSITIONS
LEFT
CENTER
RIGHT
8pcs
8pcs
8pcs

Description RAS Mode (Pick Up)
08. RAS Specification
01. SENSOR ADJUST(BV)
07. STAIN SENSOR
Adjust the Fitness Correction data
4. Press [START] key and finish adjustment
SENSOR ADJUST BV
STAIN SENSOR
OK
DATA IS VALID
PUSH START KEY
REFER TO VALUE
(STEP 5/5)

Description RAS Mode (Pick Up)
08. RAS Specification
02. SENSOR ADJUST(HP)

Description RAS Mode (Pick Up)
08. RAS Specification
02. SENSOR ADJUST(HP)
Adjust HP Sensor.
1. Set the Adjustment Gauge.
2. Press [START] button.
SENSOR ADJUST BV
SET DUMMY &
PRESS START KEY

Description RAS Mode (Pick Up)
08. RAS Specification
02. SENSOR ADJUST(HP)
Adjust HP Sensor.
3. Finish.
SENSOR ADJUST HP
OK
PS1DATA : 11 70
PS1CHK : 10 57

Description RAS Mode (Pick Up)
08. RAS Specification
03. SENSOR CONDITION
Check the sensor condition of Photo Sensor and Interrupter.
SENSOR CONDITION
Function Key
F1 : F2 :
F3 : F4 :
PS1 :ON
VP1 :OFF
PS7L :OFF
PS3 :OFF
PS6 :OFF
PS2 :ON
VP3 :OFF
PS7R :OFF
PS5 :ON
PI3 :OFF
ON / OFF

Description RAS Mode (Pick Up)
08. RAS Specification
28. VERSION READ
Read version of each CPU Board.

Description RAS Mode (Pick Up)
08. RAS Specification
29. OPTION CHECK
Test the Printer and External Keyboard

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
01. RJ SET [ ST ]
Select RJ Denomination.
USER SETTING 18. RJ DENOMI MODE
SHOULD BE “ON”

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
02. INTERFACE DATA [ 8(LENGTH : 3 / DATA : 12 / DENOMI : 128) ]
Set the DATA for Terminal Interface.
Select from Pre-sets(1~8) for both Right and Left.
SELECT
FROM
PRE-SET
1~8
Learn More? Refer to the Interface Manual.

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
03. D.D BATCH DENOMI [ MANUAL CLEAR ]
THIS SETTING IS EFFECTIVE ONLY IN
D.D MODE / FIT MODE(D.D) / ATM MODE(D.D) Set the machine behavior in Batch Counting

MANUAL CLEAR
COUNT
Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
03. D.D BATCH DENOMI [ MANUAL CLEAR ]
01. D.D. BATCH DENOMI
$10
D.D.
$10
COUNT
$50
D.D.
$10
$50
RJ

AUTO CLEAR
COUNT
Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
03. D.D BATCH DENOMI [ MANUAL CLEAR ]
01. D.D. BATCH DENOMI
$10
D.D.
$10
COUNT
$50
D.D.
$50

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
03. D.D BATCH DENOMI
02. D.D. ADD MODE [ NO ]
Select ADD Key effective ON / OFF in
D.D. MODE / FIT MODE(D.D) / ATM MODE(D.D)
SETTING
YES
SETTING
NO
D.D MODE
FIT MODE(D.D)
ATM MODE(D.D)
EFFECTIVE
NOT
EFFECTIVE

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
04. PRINTER CONTROL [ CITIZEN ]
Select Printer.
This setting is the same as User Setting

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
05. ACCEPT OPERATION
Set the behavior of Accept Operation.

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
05. ACCEPT OPERATION
01. MANUAL ACCEPT [ ON ]
Select Accept Operation, “Auto or Manual”
AUTO
MANUAL
COUNT
REMOVE
AUTO
ACCEPT

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
05. ACCEPT OPERATION
02. SEND DATA PRINTER [ OFF ]
Select Print Timing
PRINT ONLY ON
“G.TOTAL” DISPLAY
ACCEPT
SETTING
ON
SETTING
OFF
PRINT ALL ACCEPT OPERATION

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
06. REJECT FULL [ 50 ]
Set RJ Full PCS, Hopper Check Function, SUSP LED.
REJECT FULL
REJECT FULL
50 / 100
HOPPER CHECK
ON / OFF
SUSP LED
ON / OFF
Function Key
F1 : Up
F2 : Down
F3 : Left
F4 : Right

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
06. REJECT FULL
01. REJECT FULL [ 50 ]
Select RJ Full PCS 50pcs or 100pcs
02. HOPPER CHECK [ OFF ]
Select “HP Check” display on
Continuous Rejection.
HP CHECK
CONTINUOUS
REJECT
SETTING
ON

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
06. REJECT FULL
03. SUSP LED [ ON ]
Select SUSP LED ON / OFF when SUSP bills
are detected.
WHITE
ILLUMINATION
AT SUSP COUNT

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
07.KEY BOARD SET [ 01ms ~ 10ms]
Set the response time of External Keyboard.
If the printer has the trouble according to the
response time, please change this value(Longer)

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
08.AUTO MANUAL ENTRY [ OFF ]
Select Auto Manual Entry function ON / OFF
AUTO MANUAL ENTRY
AUTO MANUAL ENTRY
ON / OFF
Function Key
F1 : Left
F2 : Right
F3 :
F4 :

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
09. SD TERMINAL [ OFF ]
Select SD Terminal function ON or OFF
SD TERMINAL
SD TERMINAL
ON / OFF
Function Key
F1 : Left
F2 : Right
F3 :
F4 :

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
SUBCPU SETTING
DHCP : ON
CLI MASK : ___.___.___.___
CLI GW : ___.___.___.___
DNS : OFF
SVR IP : 192.168.11.2
SVR PORT : 49160
HOST NAME :
DNS PREF : ___.___.___.___
DNS ALT : ___.___.___.___
MAC ADDR : 00-AD-58-10-00-01
EDIT MENU
CURRENT SETTING
EDIT MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
CLIENT EDIT MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
CLIENT EDIT MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
SERVER EDIT MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
SERVER EDIT MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
SERVER EDIT MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
DNS SERVER EDIT MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
DNS SERVER EDIT MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
DNS SERVER EDIT MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
CHECK AND SAVE MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
CHECK AND SAVE MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
10. SUB CPU SETTING [ OFF ]
Set the SUBCPU Setting.
SUBCPU SETTING -EDIT MENU-
FUNCTION : OFF
CLIENT EDIT
SERVER EDIT
DNS SERVER EDIT
ENABLE CHECK and SAVE
Function Key
F1 : Up
F2 : Down
F3 :
F4 :
EDIT MENU
CHECK AND SAVE MENU

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
11. TRUTH THRESHOLD SET
Set the SUSP Value.

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
11. TRUTH THRESHOLD SET
DESCRIPTION OF PARAMETER
1. LS1 (A / B)
2. LS3 (A / B)
3. FL (A / B)
4. MG1 (A / B)
5. MG2 (A / B)
6. GS (A / B)
7. TC1 (A / B)
8. TC2 (A / B)
9-12.TC3 ~ TC6 (A)

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
11. TRUTH THRESHOLD SET
DESCRIPTION OF PARAMETER (CONTINUED)

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
11. TRUTH THRESHOLD SET
DESCRIPTION OF PARAMETER
USF-5X
NO GS
SENSOR

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
11. TRUTH THRESHOLD SET
DESCRIPTION OF PARAMETER

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
11. TRUTH THRESHOLD SET
Set the SUSP Value.

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
11. TRUTH THRESHOLD SET
DESCRIPTION OF PARAMETER (Continued)
Some parameter have value A & value B.

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
11. TRUTH THRESHOLD SET
DESCRIPTION OF PARAMETER (Continued)
Some parameter have value A & value B.
IF A<>B
IF A=B

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
11. TRUTH THRESHOLD SET
Select 2 input mode from “DENOMI base” or
“PARAMETER base”
DENOMI
BASE
PARAMETER
BASE
DENOMI BASE INPUT
PARAMETER BASE INPUT

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
11. TRUTH THRESHOLD SET
Select the input A or B by [USER] + [DISP]
A
DENOMI BASE INPUT
DENOMI BASE INPUT
B

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
12. FIT THRESHOLD SET
DESCRIPTION OF PARAMETER

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
12. FIT THRESHOLD SET
Select 2 input mode from “DENOMI base” or
“PARAMETER base”
TRUTH THRESHOLD SET
CURRENCY : EUR
CODE
0
1
2
3
4
Function Key
DENOMI
5
10
20
50
100
DEF1 A
128
128
128
128
128
F1 :Up
F2 :Down
F3 :ST/RJ
F4 :Next
TRUTH THRESHOLD SET
CURRENCY : EUR
Function Key
DENOMI :
CODE :
128
128
128
128
128
F1 :Prev
F2 :Next
F3 :+1
F4 :-1
5
0
DEF1 A
DEF2 A
DEF3 A
DEF4 A
STA1 A
DENOMI
BASE
PARAMETER
BASE
DENOMI BASE INPUT
PARAMETER BASE INPUT

Description RAS Mode (Pick Up)
08. RAS Specification
40. MACHINE SETTING [ ] is Default
MIX2 CHANGE DENOMI [ ST ]
THIS SETTING IS EFFECTIVE ONLY IN MIX2 MODE
Select the destination of the banknotes which is
detected as the different denomination in MIX2 Mode.
RJ
MIX2
MODE
STOP AT
DIFFERENT
DENOMI
$10
$10
$20
$10
$20
$20
$20
STACKER

Description RAS Mode (Pick Up)
08. RAS Specification
42. MODEL SET
01. MODEL OF MACHINES
Select Machine Model

Description RAS Mode (Pick Up)
08. RAS Specification
42. MODEL SET
02. MACHINE ID
Set Serial Number

Description RAS Mode (Pick Up)
08. RAS Specification
43. DEFAULT SET
01. ALL SET UP
Set default all settings.

Description RAS Mode (Pick Up)
08. RAS Specification
43. DEFAULT SET
02. USER SETUP
Set default USER Setting.

Description RAS Mode (Pick Up)
08. RAS Specification
43. DEFAULT SET
03. EMPLOYMENT SETUP
Set default EMPLOYMENT Setting.

Description RAS Mode (Pick Up)
08. RAS Specification
50. COUNT TEST
01. COUNT TEST 1
DO NOT USE ( FOR FACTORY )
02. COUNT TEST 2
DO NOT USE ( FOR FACTORY )

Description RAS Mode (Pick Up)
08. RAS Specification
50. COUNT TEST
03. COUNT TEST 3
Count banknotes and check the result.
1. RJ PHT2
2. DNER
3. DNER
4. DNER
5. DNER
6. DNER
COUNT
CHECK
RESULT

Description RAS Mode (Pick Up)
08. RAS Specification
60. DISPLAY LOG
01. ERROR COUNT

Description RAS Mode (Pick Up)
08. RAS Specification
60. DISPLAY LOG
01. ERROR COUNT

Description RAS Mode (Pick Up)
08. RAS Specification
60. DISPLAY LOG
02. COUNT DATA
COUNT DATA
ACCUMULATION
Function Key
MAIN MOTOR : 0H
FIN MOTOR : 0H
BRAKE : 0
SOLENOID : 1186
SHUTTER : 772
F1 :Up
F2 :Down
F3 :
F4 :

Description RAS Mode (Pick Up)
08. RAS Specification
60. DISPLAY LOG
02. COUNT DATA

Description RAS Mode (Pick Up)
08. RAS Specification
60. DISPLAY LOG
03. PASS COUNT

Description RAS Mode (Pick Up)
08. RAS Specification
60. DISPLAY LOG
04. REJECT COUNT

Description RAS Mode (Pick Up)
08. RAS Specification
60. DISPLAY LOG
05. LATEST ERROR DATA

Description RAS Mode (Pick Up)
08. RAS Specification
61. LOG DATA WRITE
01. LOG DATA WRITE
Save the LOG DATA to SD card

Description RAS Mode (Pick Up)
08. RAS Specification
62. LOG DATA WRITE
02. BV DATA WRITE
Save the recognition log to SD card
Recognition
Log

Description RAS Mode (Pick Up)
08. RAS Specification
62. DOWNLOAD
Download PROGRAM DATA

Description RAS Mode (Pick Up)
08. RAS Specification
62. DOWNLOAD
Download PROGRAM DATA

Description RAS Mode (Pick Up)
08. RAS Specification
62. DOWNLOAD
Download PROGRAM DATA
PROGRAM LIST
PROGRAM

Description RAS Mode (Pick Up)
08. RAS Specification
63. SD FILE READ
Load DENOMI DATA and ALL SETTING DATA
DATA LIST
DENOMI
AND
SETTINGS

Description RAS Mode (Pick Up)
08. RAS Specification
63. SD FILE READ
01 ALL SET FILES
Load ALL FILES in SD CARD
DATA LIST
LOAD
ALL

Description RAS Mode (Pick Up)
08. RAS Specification
63. SD FILE READ
02 DENOMI SET FILE
Load DENOMI DATA
DATA LIST
DENOMI

Description RAS Mode (Pick Up)
08. RAS Specification
63. SD FILE READ
03 PARAMETER SET FILE
Load MACHINE SETTING DATA
DATA LIST
DENOMI

Description RAS Mode (Pick Up)
08. RAS Specification
63. SD FILE READ
04 TRUTH TH SET FILE
Load SUSP SETTING DATA
DATA LIST
DENOMI

Description RAS Mode (Pick Up)
08. RAS Specification
63. SD FILE READ
05 FIT TH SET FILE
Load FITNESS SETTING DATA
DATA LIST
DENOMI

Description RAS Mode (Pick Up)
08. RAS Specification
64. SD FILE WRITE
Save DENOMI DATA and EACH SETTING DATA
DATA LIST
DENOMI
AND
SETTINGS

Description RAS Mode (Pick Up)
08. RAS Specification
64. SD FILE WRITE
Save DENOMI DATA and EACH SETTING DATA
DATA LIST
DENOMI
AND
SETTINGS

Description RAS Mode (Pick Up)
08. RAS Specification
64. SD FILE WRITE
Save DENOMI DATA and EACH SETTING DATA

Description RAS Mode (Pick Up)
08. RAS Specification
64. SD FILE WRITE
01. ALL SET FILES
Save All DATA (DENOMI DATA and ALLSETTING DATA)
to SD CARD
DATA LIST
ALL
DATA

Description RAS Mode (Pick Up)
08. RAS Specification
64. SD FILE WRITE
02. DENOMI SET FILE
Save DENOMI DATA to SD CARD
DATA LIST
ALL
DATA

Description RAS Mode (Pick Up)
08. RAS Specification
64. SD FILE WRITE
03. PARAMETER SET FILE
Save PARAMETER SET FILE to SD CARD
DATA LIST
ALL
DATA

Description RAS Mode (Pick Up)
08. RAS Specification
64. SD FILE WRITE
04. TRUTH TH SET FILE
Save SUSP SETTING DATA to SD CARD
DATA LIST
ALL
DATA

Description RAS Mode (Pick Up)
08. RAS Specification
64. SD FILE WRITE
05. FIT TH SET FILE
Save FITNESS SETTING DATA to SD CARD
DATA LIST
ALL
DATA

Description RAS Mode (Pick Up)
08. RAS Specification
90 CLEAR LOG
Clear LOG DATA
Accumulative total pass is not cleared
01. ALL DATA
Clear ALL LOG DATA
02. ERROR COUNT
Clear ERROR COUNT DATA
03. COUNT DATA
Clear MAINTENANCE LOG DATA

Description RAS Mode (Pick Up)
08. RAS Specification
93 CLEAR LOG
CLEAR LOG + DEFAULT
Clear ALL LOG and SET DEFAULT

09. Trouble Shooting
Description of Error Code
In detail, refer to the
technical document
“Service Manual”

09. Trouble Shooting
Case1 : Too Many Reject
01. THE MACHINE REJECTS MANY BANKNOTES
TOO
MANY
REJECT!!!

09. Trouble Shooting
Case1 : Too Many Reject
02. FIND THE REASON OF REJECT
WHY?

09. Trouble Shooting
Case1 : Too Many Reject
03. RAS5003 COUNT TEST TELLS YOU THE REASON
1. RJ PHT2
2. DNER
3. DNER
4. DNER
5. DNER
6. DNER
COUNT
CHECK
RESULT

09. Trouble Shooting
Case1 : Too Many Reject
04. CHECK RJ REASON
1. RJ PHT2
2. DNER
3. DNER
4. DNER
5. DNER
6. DNER

09. Trouble Shooting
Case1 : Too Many Reject
05. IF RJ REASON IS “CHEN” or “SKEW”,
the REASON is in HP CONDITION
1. CHEN
2. CHEN
3. SKEW
4. CHEN
5. SKEW
6. CHEN
HP GATE
ADJUSTMENT

09. Trouble Shooting
Case1 : Too Many Reject
06. IF RJ REASON IS
“DNER” , “LSER” , “MGER” , “MGTH” , “LSAR”,
THE REASON MIGHT BE in TEMPLATE
1. DNER
2. DNER
3. LSER
4. MGTH
5. LSAR
6. MGER
TEMPLATE
PROBLEM

TAKE NOTE DATA
AND SEND GLORY
09. Trouble Shooting
Case1 : Too Many Reject
06. IF RJ REASON IS
“DNER” , “LSER” , “MGER” , “MGTH” , “LSAR”,
THE REASON MIGHT BE in TEMPLATE
1. DNER
2. DNER
3. LSER
4. MGTH
5. LSAR
6. MGER

09. Trouble Shooting
Case1 : Too Many Reject
06. IF RJ REASON IS OTHER THAN
THOSE SHOWN BEFORE,
CHECK EACH REASON AND DEAL WITH IT.

09. Trouble Shooting
Case1 : Too Many Reject
06. IF RJ REASON IS OTHER THAN
THOSE SHOWN BEFORE,
CHECK EACH REASON AND DEAL WITH IT.

09. Trouble Shooting
Case1 : Too Many Reject
06. IF RJ REASON IS OTHER THAN
THOSE SHOWN BEFORE,
CHECK EACH REASON AND DEAL WITH IT.

09. Trouble Shooting
Case1 : Too Many Reject
06. IF RJ REASON IS OTHER THAN
THOSE SHOWN BEFORE,
CHECK EACH REASON AND DEAL WITH IT.

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
01. THE MACHINE COUNTED COUNTERFEITS
SHOULD
BE
REJECTED!!!

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
02. CHECK THE REASON OF COUNTERFEIT
PAPER
QUALITY?
INK
PATTERN?
INK
COLOR?
THREAD
PATTERN?
WATER
MARK?

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
03. CHECK DENOMINATION
DENOMI

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
04. CHECK THE PASSED DIRECTION
A?
B?
C?
D?

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
05. CHECK THE SOFTWARE VERSION
IMPORTANT

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
06. CHECK THE SUSP VALUE

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
07. TAKE PHOTO

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
01. USE FRONT SD CARD SLOT

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
01. USE FRONT SD CARD SLOT
01. COUNT BANKNOTE ONLY 1 PIECE
02. RAS 62 BV DATA WRITE
ONLY
1
PIECE

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
01. USE FRONT SD CARD SLOT
03. FINISH

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
01. USE FRONT SD CARD SLOT
04. SAVE 4 DIRECTIONS / 3 POSITIONS / 3TIMES
4 DIRECTIONS
3 POSITIONS
A
B
C
D
LEFT
CENTER
RIGHT

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
01. USE FRONT SD CARD SLOT
04. SAVE ALL DIRECTION / 3 POSITIONS / 3TIMES
1ST TRY
1st~12th
COLLECTION

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
01. USE FRONT SD CARD SLOT
04. SAVE ALL DIRECTION / 3 POSITIONS / 3TIMES
2ND TRY
13th~24th
COLLECTION

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
01. USE FRONT SD CARD SLOT
04. SAVE ALL DIRECTION / 3 POSITIONS / 3TIMES
3RD TRY
25th~36th
COLLECTION

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
02. USE BVCPU SD CARD SLOT

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
02. USE BVCPU SD CARD SLOT
01. REMOVE BACK COVER
REMOVE

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
02. USE BVCPU SD CARD SLOT
02. POWER OFF / ON
POWER
OFF / ON

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
02. USE BVCPU SD CARD SLOT
03. INSERT SD CARD
INSERT

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
02. USE BVCPU SD CARD SLOT
04. TURN ROTERY SWITCH FROM 0 TO 5

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
02. USE BVCPU SD CARD SLOT
05. COUNT BANKNOTES (UP TO 100 PCS)
COUNT
(MAX 100PCS)

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
02. USE BVCPU SD CARD SLOT
06. PUSH SWITCH ON BVCPU

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
02. USE BVCPU SD CARD SLOT
06. SAVING IN PROGRESS (CHECK LED STATUS)
FINISH
ON LOADING
START

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
02. USE BVCPU SD CARD SLOT
07. TURN ROTERY SWITCH FROM 5 TO 0
5
0

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
08. COLLECT BANKNOTE DATA
2 WAYS OF BANKNOTE DATA COLLECTION
02. USE BVCPU SD CARD SLOT
08. PUSH SWITCH ON BVCPU
CLEAR
MEMORY

09. Trouble Shooting
Case2 : Machine Counts Counterfeits
09. SEND GLORY DATA WITH INFORMATION

09. Trouble Shooting
GOOD
BAD
YOU HAVE GOOD AND BAD CONDITION BANKNOTES
Case3 : Fit Notes Go to Unfit Stacker

09. Trouble Shooting
CONDITION OF NOTES
UNFIT
STACKER
FIT
STACKER
GOOD
BAD
THE MACHINE SEPARATES NOTES INTO
FIT AND UNFIT STACKER
START
Case3 : Fit Notes Go to Unfit Stacker

09. Trouble Shooting
UNFIT
STACKER
FIT
STACKER
BUT IF FIT NOTES GO TO
UNFIT STACKER…
FIT NOTES
START
Case3 : Fit Notes Go to Unfit Stacker

09. Trouble Shooting
UNFIT
STACKER
FIT
STACKER
UNFIT
STACKER
FIT
STACKER
START
GOAL
WE NEED TO ADJUST THE FITNESS VALUE
Case3 : Fit Notes Go to Unfit Stacker

09. Trouble Shooting
UNFIT
STACKER
FIT
STACKER
UNFIT
STACKER
FIT
STACKER
LET US FIND THE REASON OF UNFIT
WHY?
START
GOAL
Case3 : Fit Notes Go to Unfit Stacker

09. Trouble Shooting
REMEMBER 3 BIG REASONS OF UNFIT
Case3 : Fit Notes Go to Unfit Stacker

09. Trouble Shooting
RAS MODE TELLS YOU THE UNFIT REASON
UNFIT
RAS
MODE
Case3 : Fit Notes Go to Unfit Stacker

09. Trouble Shooting
Case3 : Fit Notes Go to Unfit Stacker
RAS 50 COUNT TEST3
1. RJ PHT2
2. DNER
3. DNER
4. DNER
5. DNER
6. DNER
COUNT
CHECK
RESULT

09. Trouble Shooting
Case3 : Fit Notes Go to Unfit Stacker
CHECK RESULT
1. TEL FIT THC
2. TEL FIT DEF
3. ATM FIT
4. UNFIT THC
5. UNFIT DEF
6. TEL FIT DEF
CHECK
RESULT
1. TEL FIT THC

09. Trouble Shooting
Case3 : Fit Notes Go to Unfit Stacker
CHECK RESULT
1. TEL FIT THC
2. TEL FIT DEF
3. ATM FIT
4. UNFIT THC
5. UNFIT DEF
6. TEL FIT DEF
CHECK
RESULT
1. TEL FIT THC

09. Trouble Shooting
Case3 : Fit Notes Go to Unfit Stacker
THINK THE DETAILED REASON

09. Trouble Shooting
Case3 : Fit Notes Go to Unfit Stacker
THINK THE DETAILED REASON
2. STAIN
1. PARTIAL STAIN
2. INK STAIN
3. WATERMARK
4. BLEACH
5. EDGE STAIN
6. CRUMPLE STAIN
7. GRAFFITI 1
8. GRAFFITI 2

09. Trouble Shooting
Case3 : Fit Notes Go to Unfit Stacker
THINK THE DETAILED REASON
3. THICKNESS
1. CORNER FOLD
2. PARTIAL TAPE

09. Trouble Shooting
Case3 : Fit Notes Go to Unfit Stacker
YES, I THINK UNFIT REASON IS
DEFECT1(SHAPE)
UNFIT
STACKER
FIT
STACKER
FIT NOTES
=

09. Trouble Shooting
Case3 : Fit Notes Go to Unfit Stacker
CHANGE THE FITNESS VALUE
TRUTH THRESHOLD SET
CURRENCY : EUR
Function Key
DENOMI :
CODE :
128
128
128
128
128
F1 :Prev
F2 :Next
F3 :+1
F4 :-1
5
0
DEF1 A
DEF2 A
DEF3 A
DEF4 A
STA1 A
128
96

09. Trouble Shooting
Case3 : Fit Notes Go to Unfit Stacker
TEST AGAIN IN RAS50 COUNT TEST 3
1. RJ PHT2
2. DNER
3. DNER
4. DNER
5. DNER
6. DNER
COUNT
CHECK
RESULT

09. Trouble Shooting
Case3 : Fit Notes Go to Unfit Stacker
CHECK RESULT
RESULT
GOOD!!!
RESULT
NOT
GOOD…
END

10. Adjustment Each Parts
Overview of Adjustment
1. Mechanical Adjustment

10. Adjustment Each Parts
Overview of Adjustment
2. Electrical Adjustment

Overview of Adjustment
10. Adjustment Each Parts
2. Electrical Adjustment(Continued)

10. Adjustment Each Parts
Mechanical Adjustment
1. HP GATE PRESSURE
Adjust HP gate pressure when HP jam and CHAIN /SKEW
happens too much
LOOSE
TIGHT

10. Adjustment Each Parts
Mechanical Adjustment
02. Line Sensor Position
01. Loosen 4 screws of Line sensor
BACK VIEW

10. Adjustment Each Parts
Mechanical Adjustment
02. Line Sensor Position
02. Set the adjustment gauge
Detailed figure is displayed next page
Parts code: LTB0H1011Z0
LS Adjusetment Tool

10. Adjustment Each Parts
Mechanical Adjustment
02. Line Sensor Position
02. Set the adjustment gauge (Continued)
GAUGE
HOLE
GAUGE
HOLE
MACHINE
SIDE
DOOR
SIDE
BACK VIEW
LEFT SIDE VIEW

10. Adjustment Each Parts
Mechanical Adjustment
02. Line Sensor Position
03. Fix 4 screws
BACK VIEW

10. Adjustment Each Parts
Mechanical Adjustment
02. Line Sensor Position
NOTICE
When Line sensor is broken, both sides of
Line sensor should be replaced
LEFT SIDE VIEW

10. Adjustment Each Parts
Mechanical Adjustment
03. MG Sensor Position
01. Loosen 2 screws of MG sensor
BACK VIEW

10. Adjustment Each Parts
Mechanical Adjustment
03. MG Sensor Position
02. Fix screws by pressing the MG sensor
MACHINE
SIDE
DOOR
SIDE
PRESS
FIX
LEFT SIDE VIEW

10. Adjustment Each Parts
Mechanical Adjustment
04. PSD Board Position (Thickness Detection Board)
01. Loosen 7 screws of Line sensor
BACK VIEW

10. Adjustment Each Parts
Mechanical Adjustment
04. PSD Board Position (Thickness Detection Board)
02. Set the adjustment gauge
Detailed figure is displayed next page
Parts code: LTB0H1011Z0
LS Adjusetment Tool

10. Adjustment Each Parts
Mechanical Adjustment
04. PSD Board Position (Thickness Detection Board)
02. Set 2 adjustment gauges (Continued)
MACHINE
SIDE
DOOR
SIDE
GAUGE
HOLE
GAUGE
HOLE
BACK VIEW
LEFT SIDE VIEW

10. Adjustment Each Parts
Mechanical Adjustment
04. PSD Board Position (Thickness Detection Board)
03. Fix 7 screws
BACK VIEW

Electrical Adjustment
01. HP Sensor
01. Select RAS 01 HP Sensor
02. Set the Adjustment Gauge
03. Press [START] button.
SENSOR ADJUST BV
SET DUMMY &
PRESS START KEY
10. Adjustment Each Parts

10. Adjustment Each Parts
Electrical Adjustment
01. HP Sensor

Electrical Adjustment
01. HP Sensor
04. Finish
SENSOR ADJUST HP
OK
PS1DATA : 11 70
PS1CHK : 10 57
10. Adjustment Each Parts

10. Adjustment Each Parts
Electrical Adjustment
02. Line Sensor
01. Select RAS 01 SENSOR ADJUST BV - LINE SENSOR
02. Press [START] button (DO NOT SET THE GAUGE).
03. Set the Adjustment Gauge and close unit.
SENSOR ADJUST BV
PLACE A REFFERENCE
DUMMY
LTB0H1030Z0
ADJUSTMENT GAUGE SET

10. Adjustment Each Parts
Electrical Adjustment
02. Line Sensor
04. Press [START] button.
05. Finish.
SENSOR ADJUST BV
LINE SENSOR
OK
REMOVE DUMMY
PRESS START KEY

10. Adjustment Each Parts
Electrical Adjustment
03. Thickness Sensor
01. Select RAS 01 SENSOR ADJUST BV - THIN SENSOR
02. Press [START] button (DO NOT SET THE GAUGE).
03. Set the Adjustment Gauge and close unit.
SENSOR ADJUST BV
SET DUMMY SHEET &
PRESS START KEY
LTB0H5081Z0
FILM SHEET

10. Adjustment Each Parts
Electrical Adjustment
03. Thickness Sensor
04. Press [START] button
05. FINISH
SENSOR ADJUST BV
THIN SENSOR
COMPLETE

10. Adjustment Each Parts
Electrical Adjustment
04. UV Sensor
01. Select RAS01 SENSOR ADJUST BV - UV SENSOR
02. Press [START] button (DO NOT SET THE GAUGE).
03. Set the Adjustment Gauge and close unit.
SENSOR ADJUST BV
PLACE A REFFERENCE
DUMMY
LTB0H1030Z0
ADJUSTMENT GAUGE SET

10. Adjustment Each Parts
Electrical Adjustment
04. UV Sensor
04. Press [START] button.
05. Finish.
SENSOR ADJUST BV
LINE SENSOR
OK
REMOVE DUMMY
PRESS START KEY

10. Adjustment Each Parts
Electrical Adjustment
05. VP Sensor
1. Press [START] button.
2. Finish.
SENSOR ADJUST BV
VP SENSOR
OK

10. Adjustment Each Parts
Electrical Adjustment
06. MG Sensor
01. Select RAS 01 SENSOR ADJUST BV - MG SENSOR
02. Press [START] button.
03. Finish.
SENSOR ADJUST BV
MG SENSOR
OK

10. Adjustment Each Parts
Electrical Adjustment
06. MG Sensor
01. Select RAS 01 SENSOR ADJUST BV - MG SENSOR
02. Press [START] button.
03. Finish.
SENSOR ADJUST BV
MG SENSOR
OK

Electrical Adjustment
07. LINE SENSOR(FITNESS CORRECTION)
Adjust the Fitness Correction data
1. Press [START] key
2. Prepare 8 pieces of the adjustment dummy
10. Adjustment Each Parts
SENSOR ADJUST BV
PUSH START KEY &
COUNT START
(STEP1/5)
LTB0H5011Z0
FITNESS CORRECTION DUMMY

Electrical Adjustment
07. LINE SENSOR(FITNESS CORRECTION)
Adjust the Fitness Correction data
3. Count 8 pieces of the adjustment dummy in
3 Positions
10. Adjustment Each Parts
3 POSITIONS
LEFT
CENTER
RIGHT
8pcs
8pcs
8pcs

Electrical Adjustment
07. LINE SENSOR(FITNESS CORRECTION)
Adjust the Fitness Correction data
4. Press [START] key and finish adjustment
SENSOR ADJUST BV
STAIN SENSOR
OK
DATA IS VALID
PUSH START KEY
REFER TO VALUE
(STEP 5/5)
10. Adjustment Each Parts

11. Preventive Maintenance
Over View
01. MACHINE CONDITION CHECK
01. CHECK TOTAL PASS COUNT
02. CHECK ERROR HISTORY
03. REJECT CHECK
04. CUSTOMER HEARING
02. CLEANING
03. REPLACE PERIODICAL WORN-OUT PARTS
04. LUBRICATION
05. MECHANICAL ADJUSTMENT CHECK
06. SENSOR ADJUSTMENT
07. TEST

11. Preventive Maintenance
List of Periodical Replacement Parts

12. Running Test
Running Test
RAS 50 COUNT TEST3
1. RJ PHT2
2. DNER
3. DNER
4. DNER
5. DNER
6. DNER
COUNT
CHECK
RESULT

13. Log
What is Log Data?
LOG DATA… THE BEST WAY
TO HAVE 2 BENEFITS
2. SHORTEN THE MACHINE DOWN TIME
1. IMPROVE MACHINE QUALITY

13. Log
Improve Machine Quality
LOG DATA… THE BEST WAY
TO HAVE 2 BENEFITS
1. IMPROVE MACHINE QUALITY

13. Log
Improve Machine Quality
LOG
TOTAL
PASS
ERROR
HISTORY
SETTING
DATA
REJECT
TENDENCY
SENSOR
DATA
LOG DATA HAS MACHINE INFO IN ACTUAL USE

13. Log
Improve Machine Quality
GLORY ANALYSES YOUR LOG DATA
TOTAL PASS
ERROR
HISTORY
SENSOR
DATA
REJECT
TENDENCY
SETTING
DATA
ETC…

13. Log
Improve Machine Quality
GLORY IMPROVES THE MACHINE!!
(FEED BACK TO YOU)
NEW
SOFTWARE!

13. Log
Improve Machine Quality
CUSTOMER SATISFACTION,
YOUR RELIABILITY

13. Log
Improve Machine Quality
YOUR LOG FEEDBACK,
MAKES YOUR RELIABILITY!

13. Log
Improve Machine Quality
IN THE END, COLLECT LOG AND FEEDBACK
WHEN YOU VISIT YOUR CUSTOMER PLEASE
Thank you
for your
understanding!!!

13. Log
Shorten the Machine Down Time
LOG DATA… THE BEST WAY
TO OBTAIN 2 BENEFITS
2. SHORTEN THE MACHINE DOWN TIME
0
6
9
3

13. Log
Shorten the Machine Down Time
LOG DATA… THE BEST WAY
TO OBTAIN 2 BENEFITS
2. SHORTEN THE MACHINE DOWN TIME
2. ANALYSE THE LOG YOURSELF
1. GET GLORY SUPPORT FASTER!!!

13. Log
Shorten the Machine Down Time
WHEN THE MACHINE BREAKS…
YOU GO TO THE CUSTOMER SITE TO REPAIR

13. Log
Shorten the Machine Down Time
BUT THE PROBLEM COULD NOT BE SOLVED…
YOU COME BACK TO OFFICE
WITH LOG DATA

13. Log
Shorten the Machine Down Time
YOU SEND THE TROUBLE REPORT
WITH LOG DATA TO GLORY
REPORT
HELP!!!

13. Log
Shorten the Machine Down Time
GLORY ANALYSES YOUR LOG DATA
TOTAL PASS
ERROR
HISTORY
SENSOR
DATA
REJECT
TENDENCY
SETTING
DATA
ETC…

13. Log
Shorten the Machine Down Time
GLORY CAN FEED BACK TO YOU
WITH THE ACCURATE ADVICE
CHECK THE
DC MOTOR3 CABLE
OK!

13. Log
Shorten the Machine Down Time
IF YOU DID NOT COLLECT LOG DATA,
YOU HAVE TO GO CUSTOMER SITE AGAIN!!!
WE NEED
LOG DATA
FOR SUPPORT…
!

13. Log
Shorten the Machine Down Time
SO, PLEASE COLLECT LOG DATA
WHEN YOU COULD NOT REPAIR MACHINE

13. Log
Shorten the Machine Down Time
AND ALSO, YOU CAN ANALYSE THE LOG DATA
BY YOURSELF IF YOU HAVE ENOUGH SKILL
TOTAL PASS
ERROR
HISTORY
SENSOR
DATA
REJECT
TENDENCY
SETTING
DATA
ETC…

13. Log
Shorten the Machine Down Time
LOG DATA IS ALSO USEFUL FOR
PREVENTIVE MAINTENANCE
TOTAL PASS
ERROR
HISTORY
SENSOR
DATA
REJECT
TENDENCY
SETTING
DATA
ETC…
PREVENTIVE
MAINTENANCE

13. Log
Shorten the Machine Down Time
FOR EXAMPLE, YOU CAN KNOW THE
ERROR TREND AND PREVENT IT
ERROR
HISTORY
TOO MANY
SENSOR3
DUST
ERROR!
OK,
LET’S CLEAN SENSOR3
FOR PREVENTIVE MAINTENANCE!

13. Log
Summary
TO SUMMARIZE, LOG DATA IS VERY USEFUL
AND GIVES YOU LOTS OF BENEFITS!
2. SHORTEN THE MACHINE DOWN TIME
1. IMPROVE MACHINE QUALITY
IMPORTANT!

Over View of Download
2 Categories of download. Program Files and Setting Data
14. Download

Overview of Program Files
14. Download
PROGRAM LIST
6 Files of Program Software

Overview of Program Files
Which Software is loaded to which Board
14. Download

How to Load Program Files
Delete All Files in SD Card
Old and Other type of file should not be existed.
Create SD Card
Copy program files to the root directory of SD Card.
14. Download

How to Load Program Files
Set SD card
RAS28 Version Read
14. Download
Check ALL rom version
before
downloading

How to Load Program Files
RAS 62 Download
Select ALL program software in SD card or specified software
RAS28 Version Read
Check the program version so that the program is correctly
updated
14. Download

Overview of Setting Data
14. Download
4 Files of Setting Data
DATA LIST

How to Load Setting Data
Delete All Files in SD Card
Old and Other type of file should not be existed.
Create SD Card
Copy Setting files to the root directory of SD Card.
14. Download

How to Load Setting Data
Set SD card
RAS63 SD File READ
Select “All Setting files in SD card” or specified software
14. Download
SD FILE READ
* SELECT ALL FILES
DENOMI SET FILES
PARAMETER SET FILES
TRUTH TH SET FILES
FIT TH SET FILES

Download Main Program at Power ON
You can also download Main Program directory from the MainBV Board.
1. Delete ALL files in SD Card
2. Save Main Program File
3. Power OFF
14. Download
OFF

Download Program at Power ON
4. Change DSW1 to “ON”
5. Set SD Card
14. Download
ON
OFF
1
2

Download Program at Power ON
6. Power ON
7. Change DSW1 to “OFF”
14. Download
ON
ON
OFF
1
2

Download Program at Power ON
8. Check RJ LED becomes ON(Constant)
14. Download
FINISH

15. Trouble Report
What is Trouble Report?
Trouble Report is the document that describes the trouble status of the machine from an objective viewpoint.
SUB : URGENT!!!!
DEAR ALL,
Hi, our machine UWH is broken.
Can you help us?

SUB : URGENT!!!!
DEAR ALL,
Hi, our machine UWH is broken.
Can you help us?
15. Trouble Report
What is Trouble Report?
Trouble Report is the document that describes the trouble status of the machine from an objective viewpoint.
NO!

15. Trouble Report
What is Trouble Report?
Trouble Report is the document that describes the trouble status of the machine from an objective viewpoint.
SERIAL
NUMBER
CUSTOMER
NAME
TREATMENT
MACHINE
CONDITION
ERROR
CODE

15. Trouble Report
Contents of the Trouble Report
MACHINE GENERAL INFO
MODEL NAME
SERIAL NUMBER
CUSTOMER
NAME
DATE OF ISSUE
REPORTED
PERSON
REPORTED
COMPANY

15. Trouble Report
Contents of the Trouble Report
TROUBLE INFO
DATE OF OCCUR
PLACE
DATE OF
INSTALLATION
ERROR CODE
REPRODUCTIVITY
DAMAGED
PART
SOFTWARE
VERSION
HARDWARE
VERSION
TOTAL PASS
INTENTIONALLY?
HERE
VER. XXX
1 2 3 4 5 A
6 7 8 9 0 B

15. Trouble Report
Contents of the Trouble Report
TROUBLE INFO
USER SETTING
DATA
LOG DATA
IMPORTANT

16. Appendix
Gauge List
1. Line Sensor and UV Sensor Gauge

16. Appendix
Gauge List
1. Line Sensor and Thickness Sensor Board Positioning Gauge
Line
Sensor
Position
Thickness
Board
Position

16. Appendix
Gauge List
2. Line Sensor and UV Sensor Adjustment Gauge

16. Appendix
Gauge List
3. HP Sensor Adjustment Gauge

16. Appendix
Gauge List
4. Thickness Sensor Adjustment Dummy

16. Appendix
Gauge List
5. Fitness Correction Adjustment Dummy