Слайд 4Take off the engine of windshield wiper
Слайд 5Uninstall the protecting hood
Слайд 8Remember to keep the stock O2 Sensor that you take off
Слайд 10Remember to keep the stock O2 Sensor that you take off
Слайд 11Install manifold on the turbocharger
Слайд 12Please note this particular bolt should be locked from the bottom up, so
it doesn’t block another bolt beside it. Other 3 bolts are locked the normal way from top.
Слайд 13Install the silicon hose first, remember the turbo clamp, too
Слайд 14Turbocharger can be installed from this angle
Слайд 15Connect compressor housing inlet and air filter with Aluminum pipe
Lock up spot
Слайд 16Please assemble the pipes according to the specified order above
3
2
1
4
5
Слайд 20Install intercooler, please pay attention to the 3 lock up spots.
Слайд 22Aluminum Pipe 5
Install blow off
5
Install the smaller air filter
Слайд 23Install vacuum pipe
Blow off
MAP sensor
Set up of aluminum pipe and vacuum pipe
Слайд 24Install oil feed line
Please lock it tight to prevent oil leakage
Слайд 26Connection of oil feed line on the engine side
Слайд 29Install mid pipe
Connect O2 Sensor onto mid pipe first, then install both onto
to car
Слайд 31Install the protecting hood back up
Слайд 32Install engine of windshield wiper back up
Слайд 34Install windshield wiper back on