Слайд 2AWL
Is used to punch holes in leather, wood and other materials
Слайд 3AXE
Is used to cut, chop or split wood, ropes etc.
Слайд 4BOLT
Is used to fasten objects together
Слайд 6BUCKET and MOP
Are used to swab decks
Слайд 8CHIPPING HAMMER
Is used to chip off rust
Слайд 9CHISEL
Is used to chip, carve or cut into solid materials, such as wood,
stone or metal
Слайд 10Is used to remove nails.
It can also be used as a lever
CROWBAR
Слайд 11Are used for sweeping
DUSTPAN and BROOM
Слайд 12FILE
Is used to remove fine amounts of material (wood, metal) from an object
Слайд 13GRINDER
Is used for removing excess material from a piece
(polishing)
Слайд 14HANDSAW
Is used for cutting pieces of wood into different shapes
Слайд 15HATCHET
Is used to cut and split wood
Слайд 16Is used to insulate electrical wires and other materials that conduct electricity
INSULATING TAPE
Слайд 17NAIL
Is used in building, fastening or holding separate pieces together
Слайд 18NAIL PULLER
Is used for pulling out nails
Слайд 19NEEDLE SCALER
Is used for cleaning heavy paint and rust scale from metal surfaces
Слайд 20NUT
Is used to fasten multiple parts together (in conjunction with a bolt)
Слайд 21PLIERS
Are used for holding objects, bending and compressing various materials
Слайд 22PNEUMATIC HAMMER
Is used for chipping rust; most appropriate for flat surfaces
Слайд 23PRIMER
Is used as a preparatory coating put on materials before painting. It ensures
better sticking of paint to the surface, increases paint durability, and provides additional protection for the material being painted
Слайд 24PUTTY
Is used to fasten glass and fill cracks in woodwork
Слайд 26SANDPAPER
Is used to remove material from surfaces, either to make them smoother, to
remove a layer of material (such as old paint), or to make the surface rougher
Слайд 27SCISSORS
Are used for cutting various materials
Слайд 28SCRAPER
Is used to remove loose paint and scale
Слайд 29SCREW
Is used to fasten objects together
Слайд 30Is used for turning screws
SCREWDRIVER
Слайд 31SHOVEL
Is used to clean the holds
Слайд 32Is used for joining metallic surfaces by melting
SOLDERING
IRON
Слайд 35TAPE MEASURE
Is used to measure distance
Слайд 36TONGS
Are used to grip and lift objects
Слайд 37TROWEL
Is used to apply, spread, shape, or smooth loose material
Слайд 38VARNISH
Is applied over wood for gloss and protection
Слайд 39VISE
Is used to secure an object to allow work to be performed on
it
Слайд 40WIRE BRUSH
Is used for cleaning rust and removing paint
Слайд 41WRENCH
(spanner)
Is used for holding, twisting, or turning an object
(such as bolt or
nut)
Слайд 42Comment on the pictures.
What are the seamen doing? What tools are they
using?