System Setup презентация

Июнь 8, 2021

Содержание

2. 2. Loose screw
3. 3.Loose motor handle and push as below picture
4. 4. Choose [ Joint & Sequin ] -> SET
5. 5. Choose [ Excitation ] -> SET The motor will be stop.
6. 6. Lock the bolt and check sequin.
7. 6-1. If you still have problem, make loose plate spring.
8. 7. The needle must be fit the sequin center 8. If it is O.K, Lock the
10. Скачать презентацию

Слайд 2

2. Loose screw

Слайд 3

3.Loose motor handle and push as below picture

Слайд 4

4. Choose [ Joint & Sequin ] -> SET

Слайд 5

5. Choose [ Excitation ] -> SET
The motor will be

stop.

Слайд 6

6. Lock the bolt and check sequin.

Слайд 7

6-1. If you still have problem, make loose plate spring.

Слайд 8

7. The needle must be fit the sequin center
8. If it

is O.K, Lock the bolt and check the sequin again